BuenoBiotech high precision calibration bath installed in Frigoglass's laboratory in Greece recently and has been put into operation.
BuenoBiotech high precision calibration bath installed in Frigoglass's laboratory in Greece recently and has been put into operation.
The BRTS series cooling calibrator bath is a high-precision thermostatic bath developed for customers with high uniformity requirements. The temperature field uniformity is up to 0.01℃. And the structure is reasonable, saving laboratory space. LCD display, easy to operate. It adopts the refrigeration system of imported fully enclosed compressor and intelligent PID adjustment to realize automatic temperature control and stable performance. It can be used by metrology department to check and calibrate standard mercury thermometers, beckman thermometers and industrial platinum thermal resistance.
Please click here to see more details about Calibration Bath in BuenoBiotech.
Our technical staff also provided technical support online for the installation and test running with Frigoglass's laboratory. After doing the service, we found that there are several precautions and tips for the calibration bath operation:
1. After plug in, press the "circulate" key to let the oil stir and circulate. Then set up the temperature.
2. Please ensure the viscosity of oil is less than 50, please check the sepcification again. The flashing point must be higher than the bath's temperature to avoid the fire.
3. When the oil's temperature is more than 40C, please do not start the cooling system, only when the temperature is less than 40C, you can start the cooling.
4. The oil has infaltion when it's heated, the oil may flow out from the draining valve on the back.