How to operate the ultrasonic cell disperser correctly, the simple operation process is as follows:
1. Connect the plugs according to the back interface of the instrument.
2. Put the sample or test solution into the container
3. Adjust the height of the sample or lifting tray to immerse it in the horn 10-20 mm
4. Turn on the power switch
5. Make sure that the interface display horn is consistent with the reality.
6. Touch the "Run/Stop" button and the instrument starts to work.
7. Adjust the power of the corresponding horn according to the specifications in the manual
Through the correct operation and use of the instrument, users can better carry out experiments and obtain experimental data.
Click here to know about Ultrasonic Processor in BuenoBiotech