When using the ultrasonic processor | ultrasonic cell crusher, there are few things we need to pay attention to :
Firstly, the critical point of temperature protection should be above five degrees of room temperature, so that the temperature reaction will be more sensitive. The key set can be continuously pressed for more than 4 seconds to reset the specific value of temperature protection. 5 degrees is only the recommended value. We can adjust the temperature according to the surrounding environment.
Second, it is forbidden to operate the instrument in the case of ultrasonic cell crusher without inserting the liquid center. We can adjust the diameter of amplitude transformer in use to meet the requirements of our experiment. Power should not be turned on too large, so as not to damage the luffing rod.
Third, after using the ultrasonic cell crusher for a period of time, there will be some corroded holes on the surface of the amplitude transformer. We need to file these uneven parts with a file. The use of ultrasonic cell crusher is not to be ignored, is the most important in the process of our use of instruments.
